[alwrmcusn]

The computer is (purchased) HP m9150f, using PC-Wizard this information is what shows up for mainboard.

General Information :
Manufacturer : ASUSTeK Computer INC. (Asus)
Product : Benicia
Version : 1.01
Serial Number : MS1C7BR61605134
Support MP : Yes, 4 CPU(s)
Version MPS : 1.4

Chassis Information :
Manufacturer : Hewlett-Packard
Type : Desktop
Version : Chassis Version
Serial Number : Chassis Serial Number
Asset : Asset-1234567890

Sensor Information :
Hardware Monitoring : Fintek F71862F

On-Board Device Information :
Device : (Video)
Device : Intel(R) HD Audio (Sound)
Device : (Ethernet)
Embedded Controller : Yes



I tried again with the Hibernate activation:
CMD (run as administrator)
powercfg -h on
also tried
powercfg /h on
Hibernate is still not an option in my listing.

Also when booting up, the Raid Configuration screen is "Press Control I to configure". When I do that the menu screen that comes up is as shown below. I did not alter anything in this menu.
Ignore the dashes, they are used to keep the items from running together.

Main Menu
1. Create Raid Volume 3. Reset Disks to Non-Raid
2. Delete Raid Volume 4. Exit
Disk/Volume Information
Raid Volume
None defined
Physical Disks:
Port---Drive Model-----Serial #-----Size--------Type/Status(Vol ID)
0------ST3360320AS---9QF7PTJT---335.4GB----Non-Raid Disk
2------ST3360320AS---9QF7PW21--335.4GB----Non-Raid Disk