Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Dec 2002
    Posts
    3
    Points
    0

    Default

    I have two hard drives, c and d. c is pretty much full, and d is empty. I'm trying to use both, but I don't know how. if I download a program onto d, it doesn't work. I also want to move some of the stuff on c to d to free up some space, I'm constantly getting low disk space messages. I know there has to be some way to do this. Any info would help, thx

    Arletta

  2. #2
    Member Help2Go Moderator whoozhe's Avatar
    Join Date
    Dec 2000
    Location
    Wallaroo South Australia
    Posts
    8,567
    Points
    801

    Default

    Are the bios settings correct.
    If the two drives share the primary IDE (both on the same flat lead) then the 2nd drive (The one connected to the middle socket) needs to be set as a slave drive (the switch is on the side or back of drive)
    Access the bios CMOS settings by pressing a key during bootup. (The key could be DEL, F2 or another. Refer to your motherboard documentation)

  3. #3
    Member
    Join Date
    Dec 2002
    Posts
    3
    Points
    0

    Default

    ummmm, huh? I have no idea what you just said lol. I'm on a laptop also, so not sure if that makes any difference.

    <font size=-1>[ This Message was edited by: arlettaq on 2002-09-14 23:52 ]</font>

  4. #4
    Member Help2Go Moderator whoozhe's Avatar
    Join Date
    Dec 2000
    Location
    Wallaroo South Australia
    Posts
    8,567
    Points
    801

    Default

    More information is needed. Laptop brand and model.

  5. #5
    Member
    Join Date
    Dec 2002
    Posts
    3
    Points
    0

    Default

    sony vaio w/windows me

  6. #6
    Member Help2Go Moderator whoozhe's Avatar
    Join Date
    Dec 2000
    Location
    Wallaroo South Australia
    Posts
    8,567
    Points
    801

    Default

    Go to http://www.vaio-link.com/ for support faq and manuals