Results 1 to 3 of 3

Thread: help please

  1. #1
    Member
    Join Date
    Jan 2003
    Location
    william
    Posts
    1
    Points
    0

    Default

    hi all i recently added a amd k6-2 500 mhz to my computer and the old one was a amd k6-2 400 mhz.its still running at 400 mhz.i dont know how to change the fsb or any of that stuff.please help my computer is a ibm aptiva model 2158-500,chipset ali m1542/m1543,sytem board micro atx ,fsb is 100mhz ive check every where on the internet and nothing tells you how to change the stuff on your motherboard.please help

    <font size=-1>[ This Message was edited by: lewisjacksonusa on 2003-02-03 03:29 ]</font>

  2. #2
    Member
    Join Date
    Jan 2003
    Location
    Vancouver, BC, Canada
    Posts
    14
    Points
    0

    Default

    There should be a brief "press del for setup" message sent out by the bios when your computer starts, where you can specify the new settings.

  3. #3
    Member Help2Go Moderator whoozhe's Avatar
    Join Date
    Jan 2001
    Location
    Wallaroo South Australia
    Posts
    8,567
    Points
    801

    Default

    Cahnces are, as your machine is an IBM you can't change or upgrade a thing.