Results 1 to 2 of 2
  1. #1
    Member abelopan67's Avatar
    Join Date
    Oct 2005
    Posts
    11
    Points
    0

    Default Problems burning DVDs using DVD shrink and Nero

    I've been using DVD Shrink with Nero 6 to burn DVDs. Previously I have had no problems doing this, and all of a sudden the DVDs won't complete burning anymore. Originally I have been using Fuji Film DVDs to burn onto, and I switched to Memorex, but I liked the Fuji Film ones better and the problem first occurred when I started using the Fuji Film DVDs again. I'm not sure if this is just a coincidence that it started when I switched to the different brand or if it has something to do with the DVDs. I tried about 6 times from one pack of the Fuji Film DVDs, and each time the burner stalls somewhere between 10-15% compeletion. I opened a different pack Fuji Film DVDs thinking it might be just a defective pack, and I've tried 3 more out of that pack. The first attempt went to 98% completion, the 2nd to 85% and the 3rd to 65%. Since I have been having these problems I have sucessfully been able to burn a CD. Here is the error log from one of my attempts:

    ********** Nero Recode 2 **********

    Version: 2.0.0.18



    1a230d067130134699648525

    Project type: Remake a DVD
    Target size: Custom (2201600)

    Burn settings:
    Target: SONY DVD+-RW DW-D56A
    Number of copies: 1
    Write speed: 0 KB/s
    Temp folder: C:\Documents and Settings\Greg\Desktop (39501901824 bytes free)
    Direct burning: true
    Target media: DVD
    Shutdown when finished: false
    Advanced Analysis: false

    21:21:31 File burn_dvdfiles.cpp, Line 235
    Compile DVD: init

    VTS_01 Title Vobs [14098 vobus] 4463.80MB -> 4299.85MB [R 0.92]
    Video: 4104.89MB, extra: 194.96MB
    Audio: 1 streams
    0. Dolby Digital 2-ch English 157.78MB [enabled]
    Subpicture: 1 streams
    0. English 9.65MB [enabled]

    21:21:31 File burn_dvdfiles.cpp, Line 1146
    Compile DVD: begin copy 1

    21:21:31 File NeroRecorderBase.cpp, Line 534
    Writing to disc: DVD-R

    21:21:31 File NeroRecorderBase.cpp, Line 548
    Free capacity on disc: 2285855 sectors (2297888)

    21:21:31 File NeroRecorder.cpp, Line 623
    Estimated filesystem size: 544

    21:21:31 File NeroRecorder.cpp, Line 625
    Burn process started

    21:21:31 File burn_dvdfiles.cpp, Line 452
    Compile DVD: burning 2285785 sectors (2201600 required)

    21:21:31 File burn_dvdfiles.cpp, Line 649
    Compile DVD: adjust target size to 4464.42MB (4463.95MB obtained)

    21:21:31 File NeroRecorder.cpp, Line 3141
    Setting first LBA of Layer1 to 1148768

    21:21:31 File burn_dvdfiles.cpp, Line 522
    Compiling DVD Volume started

    21:21:36 File NeroRecorder.cpp, Line 366
    Reserved fragment at 0. Length: 592

    21:21:36 File NeroRecorder.cpp, Line 1383
    Reserved start fragment at 0

    21:21:36 File NeroRecorder.cpp, Line 366
    Reserved fragment at 592. Length: 64

    21:21:36 File NeroRecorder.cpp, Line 990
    Writing VTS_01_1.VOB at sector 656

    21:21:36 File vob_record.cpp, Line 648
    DirectBurn offset: VTS_01_1.VOB 112

    21:29:11 File NeroRecorder.cpp, Line 1858
    Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)

    21:29:11 File NeroRecorder.cpp, Line 990
    Writing VTS_01_2.VOB at sector 524943

    21:29:11 File vob_record.cpp, Line 648
    DirectBurn offset: VTS_01_2.VOB 524399

    21:35:45 File NeroRecorder.cpp, Line 1858
    Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors)

    21:35:45 File NeroRecorder.cpp, Line 990
    Writing VTS_01_3.VOB at sector 1049230

    21:35:45 File vob_record.cpp, Line 648
    DirectBurn offset: VTS_01_3.VOB 1048686

    21:42:27 File NeroRecorder.cpp, Line 1858
    Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors)

    21:42:27 File NeroRecorder.cpp, Line 990
    Writing VTS_01_4.VOB at sector 1573517

    21:42:27 File vob_record.cpp, Line 648
    DirectBurn offset: VTS_01_4.VOB 1572973

    9:48:56 PM #1 SCSI -1135 File Cdrdrv.cpp, Line 1441

    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x020B7000

    Status: 0x04 (0x01, SCSI_ERR)

    HA-Status 0x00 (0x00, OK)

    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)

    Sense Key: 0x03 (KEY_MEDIUM_ERROR)

    Sense Code: 0x0C

    Sense Qual: 0x00

    CDB Data: 0x2A 0x00 0x00 0x1B 0xCF 0x60 0x00 0x00 0x20 0x00 0x00 0x00

    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A

    0x00 0x00 0x00 0x00 0x0C 0x00




    21:48:56 File NeroRecorder.cpp, Line 1606
    Failed to write 144 sectors at 1822560

    21:48:56 File NeroRecorder.cpp, Line 1757
    Failed to write file to disc

    21:48:56 File NeroRecorder.cpp, Line 3072
    Disc info:
    Partitions: 0

    TotalCapacity: 2297888, FreeCapacity: 2297888, Next writable address: 656
    Number of fragments: 2
    Fragment 1 (reserved, blank), session: 1
    start: 0, next writable address: 576
    Fragment 2 (reserved, blank), session: 1
    start: 592, next writable address: 640


    ----- Begin NeroAPI error log -----

    1a230d067130134699648525



    Windows XP 5.1

    IA32

    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/19/2004 8:41:48 AM

    ahead WinASPI: File 'C:\Program Files\Nero\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM

    Nero API version: 6.3.1.13

    Using interface version: 6.3.0.6

    Installed in: C:\Program Files\Nero\NeroVision\NeroFiles\

    Application: Ahead\Nero Recode

    Recorder: <SONY DVD+-RW DW-D56A> Version: PDS3 - HA 0 TA 0 - 6.3.1.13

    Adapter driver: <atapi> HA 0

    Drive buffer : 2048kB

    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI

    Connected to MMC as unknown drive with class-nr : 11

    Drive is autodetected - recorder class: DVD+R9 DL recorder



    === Scsi-Device-Map ===

    CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 0 ID 0 DMA: Off

    DiskPeripheral : HTS548060M9AT00 atapi Port 1 ID 0 DMA: On



    === CDRom-Device-Map ===

    SONY DVD+-RW DW-D56A D: CDRom0

    =======================



    AutoRun : 1

    Excluded drive IDs:

    CmdQueuing : 1

    CmdNotification: 2

    WriteBufferSize: 74448896 (0) Byte

    ShowDrvBufStat : 0

    EraseSpeed : 0

    BUFE : 0

    Physical memory : 510MB (522580kB)

    Free physical memory: 239MB (244960kB)

    Memory in use : 53

    Uncached PFiles: 0x0

    Use Static Write Speed Table: 0

    Use Inquiry : 1

    Global Bus Type: default (0)

    Check supported media : Disabled (0)



    27.11.2005

    NeroAPI

    9:21:31 PM #1 Text 0 File DlgWaitCD.cpp, Line 245

    Last possible write address on media: 2297887 (510:38.37, 4488MB)

    Last address to be written: -1 ( 0:00.-1, 0MB)



    9:21:31 PM #2 Text 0 File DlgWaitCD.cpp, Line 257

    Write in overburning mode: NO



    9:21:31 PM #3 Text 0 File DlgWaitCD.cpp, Line 2137

    Recorder: SONY DVD+-RW DW-D56A, Media type: DVD-R

    Disc Manufacturer: Prodis - cF01

    Disc Application Code: 64, Disc Physical Code: 193



    9:21:31 PM #4 Text 0 File DlgWaitCD.cpp, Line 418

    >>> Protocol of DlgWaitCD activities: <<<

    =========================================



    9:21:31 PM #5 SCSI -1066 File Cdrdrv.cpp, Line 1187

    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02476000

    Status: 0x04 (0x01, SCSI_ERR)

    HA-Status 0x00 (0x00, OK)

    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)

    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

    Sense Code: 0x24

    Sense Qual: 0x00

    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x08 0x04 0x00 0x00

    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A

    0x00 0x00 0x00 0x00 0x24 0x00



    9:21:31 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899

    First writeable address = 0 (0x00000000)



    9:21:31 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899

    First writeable address = 0 (0x00000000)



    9:21:31 PM #8 Text 0 File DVDR.cpp, Line 1833

    Recording mode: Sequential Recording Mode for Multisession



    9:21:31 PM #9 Text 0 File Mmc.cpp, Line 20180

    Set BUFE: Power-Burn -> ON



    9:21:31 PM #10 Text 0 File DVDR.cpp, Line 1974

    Start write address at LBA 0

    DVD high compatibility mode: No



    9:21:31 PM #11 Text 0 File Cdrdrv.cpp, Line 8063

    ---- DVD Structure: Physical Format Information (00h) ----

    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

    Book Type: DVD-R (2), Part Version: 5

    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

    End Physical Sector Number of Data Area: 0 h

    End Sector Number in Layer 0: 0 h

    Data in Burst Cutting Area (BCA) does not exist

    Start sector number of the current Border-Out: 0 h

    Start sector number of the next Border-In: 0 h

    Media Specific [16..63]:

    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................



    9:21:31 PM #12 SCSI -1066 File Cdrdrv.cpp, Line 1187

    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02476000

    Status: 0x04 (0x01, SCSI_ERR)

    HA-Status 0x00 (0x00, OK)

    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)

    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

    Sense Code: 0x24

    Sense Qual: 0x00

    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x08 0x04 0x00 0x00

    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A

    0x00 0x00 0x00 0x00 0x24 0x00



    9:21:31 PM #13 SCSI -1066 File Cdrdrv.cpp, Line 1187

    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02476000

    Status: 0x04 (0x01, SCSI_ERR)

    HA-Status 0x00 (0x00, OK)

    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)

    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

    Sense Code: 0x24

    Sense Qual: 0x00

    CDB Data: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00

    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A

    0x00 0x00 0x00 0x00 0x24 0x00



    9:21:31 PM #14 Text 0 File DVDPlusDualLayer.cpp, Line 848

    L0 Data Zone Capacity set to 1148767 (11875Fh, 2243MB) ->





    Existing drivers:

    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM

    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/19/2004 8:41:48 AM

    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 2:28:09 PM (Prassi/Veritas driver for win 2K)



    Registry Keys:

    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)




    ----- End NeroAPI error log -----


    21:48:58 File NeroRecorder.cpp, Line 1999
    Burn process failed

    21:48:58 File burn_dvdfiles.cpp, Line 304
    Compile DVD: exit


    None of this means anything to me. Does anyone know what the problem is, or have any suggestions? Thanks for any help.

  2. #2
    Member Help2Go Moderator whoozhe's Avatar
    Join Date
    Jan 2001
    Location
    Wallaroo South Australia
    Posts
    8,567
    Points
    801

    Default

    You say DVD's. Are you talking about Commercial DVD's.
    It is called Anti piracy protection.
    I say no more and lock this topic.
    Take control of your life. Leave others to control their own.